6611C 40 Watt System Power Supply, 8 V, 5 A
HP / Agilent 6611C-6614C Programmable Power Supplies

High throughput
Precision low current measurement
Low-output noise
High-speed programming
GPIB and RS-232 interface
SCPI (Standard Commands for Programmable Instruments)

VXI plug&play drivers
For complete details, click on the Data Sheet link

6611C-J05 Special Order Power Supply, 10 V, 5 A

Output rating: 10V
Not presently available with CE mark
No 50 Hz operation (60 Hz only)
Special order products may not be returned for credit
For complete details about the standard 6611C,

click on the data sheet link

@

The Agilent 6611C System dc Power Supply is an ideal power source for demanding production test applications. This dc power supply offers high performance and precision measurements in a one-box solution. To reduce test-system development time and provide precision testing, the 6611C provides current measurement down to the microamp level. The 6611C also provides high-speed programming with under 4 millisecond response time.

@

Single-Output: 40-50 W GPIB

Specifications (at 0X to 55XC unless otherwise specified)

6611C 6612C 6613C 6614C

6611C - J05

Special Order Option

Number of outputs  1 1 1 1 1
GPIB     Yes Yes Yes Yes Yes
Output Ratings
Voltage     0 to 8 V 0 to 20 V 0 to 50 V 0 to 100 V 0 to 10 V
Current 0 to 5 A 0 to 2 A 0 to 1 A 0 to 0.5 A 0 to 5 A
Programming accuracy (at 25XC 5XC)
Voltage    5 m V 10 m V 20 m V 50 m V 5 m V
+Current      0.05% + 2 m A 1 m A 0.75 m A 0.5 m A 2 m A
Ripple and noise 20 Hz to 20 MHz, with outputs ungrounded or with either terminal grounded
Voltage  rms 0.5 mV 0.5 mV 0.5 mV 0.5 mV 0.5 mV
peak -to-peak 3 mV 3 mV 4 mV 5 mV 3 mV
Normal mode      rms 2 mA 1 mA 1 mA 1 mA 2 mA
dc measurement accuracy via GPIB or front-panel meters respect to actual outputat 25XC 5XC
Voltage      0.03% + 2 mV 3 mV 6 mV 12 mV 2 mV
Low current range -20 mA to + 20 mA     0.1% + 2.5 µA 2.5 µA 2.5 µA 2.5 µA 2.5 µA
High current range +20 mA to + rated 1  0.2% + 0.5 mA 0.25 mA 0.2 mA 0.1 mA 0.5 mA

-20 mA to - rated 1

0.2% + 1.1 mA 0.85 mA 0.8 mA 0.7 mA 1.1 mA
Load regulation
Voltage     2 mV 2 mV 4 mV 5 mV 2 mV
Current     1 mA 0.5 mA 0.5 mA 0.5 mA 1 mA
Line regulation
Voltage     0.5 mV 0.5 mV 1 mV 1 mV 0.5 mV

Transient response time Less than 100 µs for the output to recover to its previous level (within 0.1% of the
voltage rating of the supply or 20 mV, whichever is greater) following any step change in load current of up
to 50% of the output current rating of the supply

Supplemental Characteristics

(Non-warranted characteristics determined by design and useful in
applying the product)

Average programming resolution
Voltage     2 mV 5 mV 12.5 mV 25 mV 3 mV
Current     1.25 mA 0.5 mA 0.25 mA 0.125 mA 1.25 mA
Sink current     3 A 1.2 A 0.6 A 0.3A 3 A

Products list | brand | Model No. | Home