GFG-8210 Function Generator

Frequency Range：0.1Hz ~ 10MHz

Waveforms： Sine, Triangle, Square, Ramp, TTL and CMOS Output

External Voltage Controlled Frequency (VCF) Function

Duty Cycle Control with Signal Inversion Capability

Variable DC Offset Control

Two-Step (-20dBx2) and Variable attenuator

Built-in 6 Digit Counter with INT/EXT Function up to 150MHz / high resolution

LIN/LOG Sweep Mode

Sweep Output

SPECIFICATIONS
Main
Frequency Range	0.1Hz ~ 10MHz (8 ranges)
Amplitude	>10Vp-p (into 50Ω load)
Impedance	50Ω ±10%
Attenuator	-20dB ±1dB x 2
DC Offset	<-5V ~ >5V( into 50Ω load)
Duty Control	15% : 85% : 15% to 1MHz Continue variable (square wave only)
Display	6 digits LED display

Sine Wave
Distortion	1% typical
Flatness	±0.45dB (±5%)

Triangle Wave
Linear	>98% to 100kHz

Square Wave
Symmetry	±2%, 1Hz ~ 100kHz
Rise or Fall Time	< 35nS

CMOS Output
Max. Frequency	2MHz
Level	<4Vpp ~ 14.5Vpp ±0.5Vpp adjustable
Rise or Fall Time	<120nS

TTL Output
Level	>3Vpp
Rise or Fall Time	<20nS

VCF
Input Voltage	0V~10V ± 1V(100 : 1)
Input Impedance	10kΩ ±10%

Sweep Operation
Sweep/Manual	Switch selector
Sweep/Rate	>100 : 1 ratio max. and adjustable
Sweep/Time	0.5sec. ~ 30sec. adjustable
Sweep/Mode	Lin./Log. switch selector
Sweep/Out	0V ~ 10 ±1V

Frequency Counter
INT./EXT.	Switch selector
Range	0.1Hz ~ 10MHz (5Hz ~ 150MHz EXT.)
Accuracy	Time base accuracy ±1 count
Time base	±20ppm (23°C ±5°C) after 30 minutes warm up
Resolution	The maximum resolution is 100nHz for 1Hz and 1Hz for 100MHz

Input Impedance
1MΩ//150pF

Power Source
AC 115V/230V±15%, 50/60Hz

Accessories
Power cord × 1, Instruction manual × 1, GTL-101 × 2 BNC-ALLIGATOR For:GOS-310, GVT-8010H, GFC-8131H/8270H, GFG-Series

Dimensions & Weight
251(W) × 91(H) × 291(D) mm, Approx. 2.2 kg