GOS-622G 20MHz Oscilloscope
|
 High sensitivity 1mV/DIV
Z axis input
Hold Off Function
|
¡@
|
SPECIFICATIONS |
|
| CRT | |
| Type |
6-inch rectangular type with internal graticule 8 x 10 DIV (1 DIV=1 cm) |
| Z-axis input | Input Impedance : Approx. 5k£[ |
| Sensitivity : Above 3Vp-p | |
| Bandwidth : DC ~ 5MHz | |
| VERTICAL SYSTEM | |
| Sensitivity | 5mV ~ 5V / DIV ¡Ó3%, 1mV ~ 2mV / DIV ¡Ó5% |
| Bandwidth | DC ~ 20MHz |
| DC ~ 10MHz at 1 ~ 2mV / DIV | |
| Rise Time | 17.5nS (35nS at 1mV ~ 2mV / DIV) |
| Input Impedance | Approx. 1M£[ |
| Input Coupling | AC, DC, GND |
| Vertical mode |
CH1,
CH2, DUAL, ADD, CH2 INV (Dual automatic switching ALT and CHOP) |
| HORIZONTAL SYSTEM | |
| Sweep Time |
0.1µS
~ 0.5S / DIV¡Ó3%¡F 100nS ~ 50mS / DIV¡Ó5% (x 10MAG)¡F 10nS ~ 50nS¡Ó8% (x 10MAG) |
| TRIGGER | |
| Trigger Mode | AUTO, NORM |
| Trigger Source | CH1, CH2, ALT, LINE, EXT |
| Trigger Coupling | AC, DC, HF, REJ, TV |
| Trigger Slope | "+" or "-" |
| X-Y OPERATION | |
| Sensitivity | 5mV ~ 5V / DIV¡Ó4% |
| X-axis Bandwidth | DC ~ 1MHz |
| Phase Error | 3º or less from DC ~ 50kHz |
| OUTPUT SIGNAL | |
| Trigger Signal Output | Voltage : approx. 50mV / DIV into 50£[ |
| Calibrator Output | 1kHz Square wave, 2Vpp¡Ó2% |
| POWER SOURCE | |
| AC 100V / 120V/220V / 230V ¡Ó10%, 50 / 60Hz | |
| ACCESSORIES | |
| Power cord x 1 ; Instruction manual x 1 ; Probes(10:1/1:1) x 2 | |
| DIMENSIONS & WEIGHT | |
| 310(W) x 150(H) x 455(D) mm¡F Approx. 8.2kg | |
Products list | brand | Model No. | Home