GOS-652G 50 MHz Oscilloscope

SPECIFICATIONS
CRT
Type	6-inch rectangular type with internal graticule;
	0%, 10%, 90% and 100% markers. 8 x 10 DIV (1 DIV=1 cm)
Phosphor	P31
Accelerating Potential	12kV
Illumination	Continuously adjustable
Z-axis input	Input Impedance: Approx. 5kΩ
	Sensitivity : Above 3Vp-p
	Bandwidth : DC ~ 5MHz

VERTICAL SYSTEM
Sensitivity	5mV ~ 5V / DIV ±3%, 1mV ~ 2mV / DIV ±5%
Bandwidth	DC ~ 50MHz
	DC ~ 15MHz at 1mV ~ 2mV/DIV
Rise Time	7nS (23.3nS at 1mV ~ 2mV/DIV)
Input Impedance	Approx. 1MΩ
Input Coupling	AC, DC, GND
Vertical Mode	CH1, CH2, DUAL, CH2 INV, ADD. (Dual automatic switching ALT and CHOP)

HORIZONTAL SYSTEM
Sweep Time	0.1µS ~ 0.5S / DIV ±3%,
	100nS ~ 50mS / DIV ±5% (x 10MAG),
	10nS ~ 50nS / DIV ±8% (x 10MAG)

TRIGGER
Trigger Mode	AUTO, NORM, SINGLE
Trigger Source	CH1, CH2, ALT, LINE, EXT
Trigger Coupling	AC, DC, HR, REJ, TV
Trigger Slope	"+" or "-"

X-Y OPERATION
Sensitivity	5mV ~ 5V / DIV ±4%
X-axis Bandwidth	DC ~ 2MHz
Phase Error	3º or less from DC ~ 50kHz

OUTPUT SIGNAL
Trigger Signal Output	Voltage : approx. 50mV / DIV into 50Ω
Calibrator Output	1kHz Square wave, 2Vpp ±2%

POWER SOURCE
AC 100V / 120V / 220V / 230V ±10%, 50 / 60Hz

ACCESSORIES
Power cord x 1; Instruction manual x 1 ; Probes(10:1/1:1)x2

DIMENSIONS & WEIGHT
310(W) x 150(H) x 455(D) mm； Approx. 8.2kg