IT6800A/B Single Channel Programmable DC Power Supply

IT6800 single channel programmable DC power supply (180W-216W) with resolution 1mV/0.1mA, users can adjust the voltage/current stepping by pressing the left and right keys to moving the cursor and programs by the front panel. OVP/OTP protection. IT6800 supports timer function and their built-in RS232 and USB communication interfaces offer you a convenience testing experience.

Model                 Voltage        Current           Power           Interface

IT6831A

18V

10A

180W

USB/RS232

IT6832A

32V

6A

192W

USB/RS232

IT6832B

32V

6A

192W

USB/RS232/GPIB

IT6833A

72V

3A

216W

USB/RS232

IT6833B

72V

3A

216W

USB/RS232/GPIB

IT6835A

50V

4A

200W

USB/RS232

IT6835B

50V

4A

200W

USB/RS232/GPIB

*IT6800A single channel series is standard model, IT6800B single channel series is optional if you need GPIB interface.

* The above specifications are subject to change without prior notice.

Product Features

 Support panel programming, numeric keypad operation
 High accuracy and resolution 1mV/0.1mA
 Outputs according to the programmed voltage and current values
 Adjust the voltage and current via knob
 Lower ripple and noise
 Remote sense
 Built-in RS232 / USB/ GPIB interface *1
 Intelligent fan control, save energy and reduce noise

*1 Built-in GPIB is available with IT6800B series only

Functions and Advantages

Support panel programming function (List)
The IT6800A Series single channel Programmable DC Power Supply generates a variety of output change sequences by sequentially operating each single step value and time. The parameters in the sequence include time units, single-step voltage, single-step current, single-step time, and the next step , looping steps, saving files, and so on. After the sequential operation is completed, when a trigger signal is received, the power is turned on until the sequence operation is completed or another trigger signal is received again.


Remote sense function
In order to avoid the pressure drop caused by the length of the wire connecting the load, the remote test allows measurement directly on the terminal of the test object to improve the measurement accuracy. S +, S is the remote measurement terminal, +, - is the output positive and negative terminals. When using the remote measurement function, it is necessary to disconnect the wires connected to the "+, -" terminals and lead S +, S to the test object.



Output timer
IT6800A/B series supports Output timer function
users can start this function in the Menu and set the time. The timers starts working when the unit is powered on. The unit will automatically turn off the output when the set time is due. Timing time setting range 0.1 - 9999.9S or 0.1 - 9999.9M.

Options & Accessories

·        

CD (accessory)

With user manual and communica...

·        

AC power cord (accessory)

AC power cord (accessory)

·        

IT-E151A (Optional)

19'' Rack mount kit

·        

IT-E151 (Optional)

19'' Rack mount kit

·        

IT-E30110-AB (Optional)

10A/1m/Alligator clip - Banana...

·        

IT-E30110-BB (Optional)

10A/1m/Banana plug - Banana pl...

·        

IT-E30110-BY (Optional)

10A/1m/Banana plug - Y termina...