A1110-40-QE-70-16

4-quadrant voltage and current amplifier
DC-1 MHz |  60 V/μs | 1000 W (source)

        1  Product Description

The A1110-40-QE-70-16 is a linear, extreme-broadband, precision power amplifier with optimized voltage ranges for automotive wiring system simulation.

The A1110-40-QE-70-16 can be operated as a voltage amplifier or current amplifier. The current amplifier offers a constant, frequency-invariant output current for inductive loads.

Three optional operating voltages per polarity are available for high-voltage/low-current or low- voltage/high-current applications. The voltage switch-over can be implemented optionally as manual or automatic. Especially in case of very low-impedance loads, the operating voltage can be reduced to 1/10 which is associated with a corresponding reduction of the power loss.

Output voltage and output current can be limited and observed on low-impedance monitor outputs.

The device is equipped with a temperature-controlled, quietly-running fan. As well as an over- temperature protection, a power-loss calculation and an absolute-current monitoring guarantees perfect short-circuit and overload protection.

An interlock offers the possibility of a remote-controlled security system.

The device can be operated by using elements on the front panel. Additionally the device can be controlled with the supplied A1110 Control Software via an USB connection.

2  Features

•      4-quadrant voltage and current amplifier

•      Fully configurable and operable by means of the supplied software

•      Output voltage max. 70 Vpeak

•      Output current max. 40 Apeak


•      Output current 80 Apeak

/ 10 ms


•      Symmetrical input

•      Series / parallel input connection in case of higher voltage / current requirements

•      USB port as standard (LAN interface optional)

•      Auto-commutating voltage supply

•      Interlock

•      Voltage / current monitor output

•      Sensing Inputs

•      Up to 6 configurable compensation networks for inductive loads in current amplifier mode.

Five general-purpose networks are onboard per default.

3 Applications

•      General lab applications for research, development and testing

•      EMC testing

•      Material testing

•      MRI

•      Component tests

•      Plunger coil drives

•      Piezo actuation

•      Generation of magnetic fields (e.g. with Helmholtz coils)

•      Medical engineering

•      Laser technology

•      Plasma technology

4  Control Software

The scope of delivery includes an application software that ensures fully remote-controlled operation and comprehensive configuration of the amplifier via the USB or LAN interface. In this context, disclosure of the line commands guarantee trouble-free integration of existing automated test systems.

Figure 1: A1110-QE-Control Main Menu

5  Current Amplifier

In current control mode, the A1110-40-QE-70-16 behaves like a voltage-controlled current source and delivers a nearly frequency-independent  constant load current to an inductive load.

The following five compensation networks are equipped ex works.

No

Load

Rc

Cc

Current Range

1

1 Ohm + 500 uH

100 kOhm

10 nF

high

2

0,1 Ohm + 200 uH

68 kOhm

4,7 nF

high

3

1 Ohm + 1mH

150 kOhm

22 nF

high

4

4 Ohm + 1,8 mH

200 kOhm

1 nF

high

5

0,078 R + 88 uH

80 kOhm

6,8 nF

high

6

Reserved for Option-01

     

Table 3: Compensation networks

The selection is made by our A1110-QE-Control software. Please also note the corresponding recommended current measuring range.

If none of the above compensation networks is suitable for your application, please order your amplifier with Option-01: Custom Current Amplifier. Our engineers will design a custom compensation network specific for your needs. You can add additional networks to your amplifier. Up to six customs networks are possible as existing ones can be removed.

We would be pleased to assist you in the realization of a compensation network for your application.

6  Specifications

Parameters

Specification

Conditions

 

Controlled Voltage Mode

20° C ambient temperature

     

Input Impedance

100 kOhm

Unbalanced, 1 kHz

 

200 kOhm

Balanced, 1 kHz

Small Signal Bandwidth

DC-600 kHz

+0, -3 dB, @ 10 kOhm

High Voltage

Large Signal Bandwidth

DC-200 kHz

+0, -3 dB, 10 Ohm

High Voltage

Slew Rate

60 V/µs

@10 kOhm

DC-Offset

< 1 mVDC

 

THD+N

< 0,2 %

10 Vp/100 Hz @ 0,06 Ohm; < 80 kHz Bandwidth

Residual Noise

< -69 dBV

< -62 dBV

10 Hz - 22 kHz

10 Hz - 500 kHz

Max Output Voltage

...Range I  (Low Voltage)

...Range II (Mid Voltage)

...Range III (High Voltage)

+18/-16 Vdc

+27/-16 Vdc

+70/-16 Vdc

 

Max Output Current

40 Ap

 

Current, Pulse, 500ms,

5% Duty Cycle, unipolar

80 Ap

Auto Mode, rise-/fall-time >20us

Max Output Power

1 kW

 
     

Voltage Monitor

±1 V 10 V ± 0.5%

< 200 kHz

Current Monitor

±1 V 10 A ± 1%

< 100 kHz

     

Gain

   

Controlled Voltage Mode

1 V / 10 V; ± 0.1%

Uin / Uout

     

Interface

USB 2.0, LAN

 

AC Power

1x230 VAC / 1x16 A / 50 Hz /

 

6.1   Pulse Response

Figure 3: C3: Output Voltage; C4: Output Current; Vin: 10 kHz , Load: 2,5 Ohm

7  Product Options

The following product options are available at the time of placing the order. Upgrades of existing devices are not possible.

Article Name

Article Description

Order Number

A1110-40-QE-70-16

4-Quadrant Voltage and Current Amplifier

11100160

Option-01: Custom Current Amplifier

Additional compensation network for one specified load. The device is equipped with five general-purpose  networks by default.

11101010

Option-03: Ultra Stable Gain

Gain 10±0,1% (±25ppm/C°); Offset ±1mV (±25uV/C°)

11101030

Option-05:  Isolation Amplifier

For potential isolation of input and output

11101050

Option-06: Ethernet Interface

For connection to a computer (RJ45)

11101060

Option-10:  Internal Current Measurement

High-performance current transformer; Precision DC +/-0.1%; Output BNC bush, galvanically isolated from the amplifier

11101100

Option-11: Voltage and Current Displays

Display in front panel (monitor outputs)

11101110

Option-12: Adjustable Output Resistance

R: 0 mΩ – 200 mΩ; Resolution 1 mΩ; Accuracy 0.5%

11101120

Option-14: Overvoltage Protection

For protection of amplifier outputs

11101210

 

 

Products list | brand | Model No. | Home