Digital Oscilloscopes DS-5500A SeriesSpecifications

	DS-5554A	DS-5552A	DS-5534A	DS-5532A	DS-5524A	DS-5522A	DS-5514A	DS-5512A
Frequency bandwidth(-3dB)	500MHz		350MHz		200MHz		100MHz
Rise time(Typical)）	750ps		1ns		1.75ns		3.5ns
Input Channel	4	2	4	2	4	2	4	2
Maximum Sampling Speed	1GS/s(all CHs)/ 2GS/s(Channel combined)						1GS/s
Equivalent Sampling Rate	100GS/s
Peak detect resolution	1ns
Averaging	2 to 256 times
Maximum Memory Length	1Mpts/ch(for all CHs)
Vertical Resolution	8-bit
Input voltage range	2mV/div - 10V/div(1MΩ), 2mV/div - 2V/div(50MΩ)				2mV/div - 10V/div(1MΩ)
Offset voltage	2mV/div - 50mV/div : ±1V 50.2mV/div - 500mV/div : ±10V 502mV/div - 10V/div : ±100V
DC gain accuracy	±1.5% + (0.5% of fullscale)
Maximum Input Voltage	±400Vpeak CAT I (1MΩ), 5Vrms (50Ω)				±400Vpeak CAT I (1MΩ)
Band-limiting filter	Analog form : 100MHz,20MHz,2MHz,200kHz				Analog form : 20MHz,2MHz,200kHz
	Digital form : Either of LPF/HPF/OFF is selected with each channel. 4 independent channels
Input coupling	GND, DC 1MΩ, AC 1MΩ,DC50Ω				GND, DC 1MΩ, AC 1MΩ
Input Impedance	1MΩ±1% //16pF、 50Ω±1%				1MΩ±1% //20pF
Probe sense	Automatic：　1：1、10：1、100：1、1000：1 Manual：　1：1、5：1、10：1、20：1、50：1、100：1、200：1、500：1、1000：1、2000：1
Timebase	500ps/div ∼ 50s/div		1ns/div ∼ 50s/div		2ns/div ∼ 50s/div		5ns/div ∼ 50s/div
Standard probe	SS-101R (multi-channel)				SS-0130R (multi-channel)
Roll mode	50ms/div ∼ 50s/div (100kS/s max)
Timebase (Clock) accuracy	±10 ppm
Trigger function
Trigger type	Edge, Edge ALT, Edge OR, Pulse Count, Pulse Width, Period,Dropout, TV, OR, NOR, AND, NAND
TV mode / Line number / Field sequence	NTSC, PAL, Custom / upto 3,000 / 1, 2, 4 & 8 fields
Pulse Count Trigger	1 to 9999 events
Pulse Width Trigger	15ns to 50s
Period Trigger	40ns to 50s
Dropout Trigger	50ns to 50s
Pattern Trigger	OR、NOR、AND、NAND
Trigger source / Status / threshhold level setting	All channels / High, Low、 Don't Care / All channels set independently
Trigger Source	Input CHs, Line, EXT(+/-0.5V), EXT10(+/-5.0V)
Trigger Slope /Coupling	+,- / AC, DC, HF Rej, LF Rej, Noise Rej
Display function
Display size/ resolution	7.5inch color TFT-LCD with Touch screen / VGA(640*480pixels)
Display mode	YT、XY、XY (Triggered)
Vector Display Method	Interpolation on sample points or Dots
Analog persistence mode	Monochrome grayscale or Color Spectrum
Persistence time setting	100ms, 200ms, 500ms, 1s, 2s, 5s, 10s & Infinite
Reference waveform memory	5 waveforms
Panel setting memory	5settings for Internal memory or USB memory
Parameter measurement, Cursor, Zoom, Calculation, Replay
rameter measurement	Maximum, Minimum, Peak-Peak, RMS, Cycle RMS, Mean, Cycle Mean, Top, Base, Top-Base, +Overshoot, -Overshoot, Tr 20-80%, Tf 80- 20%, Tr 10-90%, Tf 90-10%, Freq., Period, +Pulse Count, -Pulse Count, +Pulse Width, -Pulse Width, Duty Cycle, Integral, Skew (+, -), Skew at level
Concurrent number of measurements / statistics display	Four parameter maximum /Max (Maximum), Min (Minimum) ,Num (Number of the total waveforms)
Logging item, destination	Time and parameter measurement results (conditions A, B, C, D), Pass/Fail judgment results When recording: Pop-up window, internal memory (up to 86400 entries), After recording: USB memory
Pass/Fail	Judgment mode: Select between Parameter judgment and Mask judgment, Judgment result: Save waveform (USB memory)/ Beep/ Pulse output (when equipped with DS-578 option)/ Logging, Page search function: Select any of Fail or Pass, you can search forward or backward
Cursor	Time, Amplitude, Time and Amplitude, Value at cursor
Zoom	Zoom key enable display at individual grid area
Calculation	Addition, Subtraction, Multiplication, FFT(8k points maximum, RECTANGULAR, HANNING, FLATTOP)
Rescaling / Unit conversion	a*x+b(x: input voltage at User defined a and b) / Volt, Ampere, Watt, degree and unit-less
Replay	Automatic waveform recording upto 1,024waveforms, History Replayable
Counter	6-digit
Interface (standard)	USB 2.0(Host&Device), LAN(100Base-TX), GPIB(Factory option: DS-576)
AUX Interface	AUX connector for External options
Waveform Data Storage	UUSB memory for Binary, ASCII, Mathcad, Calculation(ASCII) & Calculation(Mathcad)
Hardcopy Output	Output form front panel USB port to USB memory in TIFF, BMP & PNG format or Output to PictBridge Printers
Calibration signal output	Square waveform at 1kHz, 3Vp-p
Power / power consumption	AC 90Vrms to 240Vrms, 47Hz to 63Hz, AC 90Vrms to 132Vrms, 380Hz to 420 Hz, 95VA max (60W max)
Dimensions (mm) / Weight	Approx. 330W × 190H ×124D / Approx. 3.7kg
Environmental condition
Performance guarantee temperature	+10℃ to + 35℃
Operation temperature and humidity / Altitude conditions	0deg. to +40˚C at 5 to 80%(RH<=30˚C) and 55%RH or less at 40˚C non-condensation / 2,000meter or lower
Accessory
Probe(multi-channel), Power cord, Front panel cover, CD-ROM(Instruction Manual, Remote Control Manual), User's Guide
Factory options
AUX IO CH1/CH2 output DS-577 (factory option)	AUX IO1: Output of CH1 input signal with applied offset voltage, AUX IO2: Output of CH2 input signal with applied offset voltage
AUX IO CH1/TRIG output DS-578 (factory option)	AUX IO1: Output of CH1 input signal with applied offset voltage, AUX IO2: H-level pulse signal output occurs under the following conditions ・Output when triggered ・Output when Pass/Fail judgment result becomes Pass or Fail
GPIB Interface DS-576 (factory option)	GPIB: IEEE488.2 (factory option)
2 ways optional for Probe Power supply DS-579	Our active probe power supply (2 systems)