MWJ-6392EU DVD Jitter Meter Unit
The MWJ-6392EU was commercialized in order to contribute rationalization of |
 |
|
SPECIFICATIONS |
|
||
| Input Section | |
| Input signal | EFM Plus signal (RF or Binary signal) (Binary signal is not acceptable at EQ-on) |
| Input level range | 0.3Vp-p to 3Vp-p |
| Input impedance | Approx. 1MΩ |
| Measuring Section | |
| Measuring clock frequency range | 25.9 to 27.5MHz |
| Measuring range | 10% and 20% |
| Measuring edge (Polarity) | +, - and ± of input signal |
| Equalizer | Conforms to JIS×6241 3.2dB±0.2dB (at 5.16MHz of 27MHz clock frequency) |
| PLL circuit | Conforms to JIS×6241 |
| Input/output terminal | |
| RECORDER output | 10%/V (10% range) and 20%/V (20% range) Max. 2V, ±0.05V (open circuit) |
| MONITOR output | -6dB to input signal, ±1dB (50Ω load) |
| INHIBIT input | TTL level (Active low) |
| REMOTE terminal | Connector for remote-control |
| Others | |
| Power requirements | AC 100/120V to 220/240V ; 15VA |
| Operating temperature range | 0ºC to +40ºC |
| CONNECTOR | |
| Case outer dimensions | 222 (W) × 132 (H) × 23 (D) mm |
