| Model |
DS1062CA |
DS1102CA |
DS1202CA |
DS1302CA |
| Bandwidth |
60MHz |
100MHz |
200MHz |
300MHz |
| Real-time Sample Rate |
400 MSa/s, 2 GSa/s (Logic Analyzer) |
| Equivalent Sample Rate |
50 GSa/s |
| refresh rate |
2000 wfms/s |
| Memory Depth |
10 kpts (Single Channel), 5 kpts (Dual Channel) |
Advanced Features
| 1. The 2 GSa/s maximum real-time sample rate, the 50 GSa/s maximum equivalent time sample rate |
| and up to 300 MHz of bandwidth ensures you capture and observe your entire signal. |
| 2. Up to 2000 wfms/s refresh rate |
| 3. Ultra Compact Design with small footprint save your bench space |
| 4. 5.7¡¦ 64K TFT color LCD, bright and vivid waveform display |
| 5. Memory depth: 10 kpts (Single Channel), 5 kpts (Dual Channels) |
| 6. Versatile trigger modes: Edge, Video, Pulse Width, Slope, Alternate |
| 7. Adjustable trigger sensitivity: Effectively filter noise from trigger signal and avoid false trigger |
| 8. 20 automatic measurements |
| 9. Cursor measurements: Manual, Track and Auto Measure modes |
| 10. 10 waveforms, 10 setups, BMP and CSV storage |
| 11. Math functions: Add, Subtract, Multiply, FFT, Invert |
| 12. Special digital filter and waveform recorder |
| 13. Built-in hardware frequency counters |
| 14. Dual channels plus external trigger. Bandwidth including 60 MHz, 100 MHz, 200 MHz, 300 MHz |
| 15. Standard interface: USB Device, RS-232¡FUSB Host, to support USB disk and USB printer |
| 16. Standard configuration: Pass/Fail test,the signal out of the pass fail function is isolated |
| to prevent unwanted interference |
| 17. Multi-language user interface, built-in help system |
|
| Model |
DS1062CA |
DS1102CA |
DS1202CA |
DS1302CA |
| Bandwidth |
60 MHz |
100 MHz |
200 MHz |
300 MHz |
| Memory Depth |
10 kpts (Single Channel), 5 kpts (Dual Channel) |
| Channels |
Dual Channels + External Trigger |
| Real-time Sample Rate |
2 GSa/s(Single Channel), 1 GSa/s (DUal Channel) |
| Equivalent Sample Rate |
50 GSa/s |
| Rise Time |
5.8 ns |
3.5 ns |
1.7 ns |
1.2 ns |
| Time Base Range |
5 ns/div to 50 s/div |
2 ns/div to 50 s/div |
1 ns/div to 50 s/div |
| Input Impedance |
1 M£[ || 15 pF |
1 M£[ || 15 pF¡A50 £[ |
| X-Y Operation |
Bandwidth |
60 MHz |
100 MHz |
200 MHz |
300 MHz |
| Phase Difference
| ¡Ó 3¢X |
| Trigger Modes |
Edge, Video, Pulse Width, Slope, Alternative |
| Trigger Sources |
CH1¡ACH2¡AExt¡AExt/5¡AAC Line |
| Common Parameters |
| Vertical Sensitivity |
2 mV/div to 10 V/div |
| Vertical Resolution |
8 bits |
| Input Coupling |
DC, AC, Ground |
| Maximum Input Voltage
| 300 V (DC + AC peak) |
| Roll Range |
500 ms/div to 50 s/div |
| Automatic Measurements |
Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Delay1¡÷2, Delay 1¡÷2 |
| Cursor Measurements |
Manual, Track and Auto Measure modes |
| Math |
Add, Subtract, Multiply, FFT, Invert |
| Storage |
Internal¡G10 Waveforms and Setups |
| USB¡GBMP, CSV, Waveforms and Setups |
| I/O |
USB Device¡AUSB Host¡ARS-232¡AP/F Out (Isolated) |
| Display |
TFT (64K, Color LCD), 320 x 234 |
| Power
| Worldwide Use, 100 ¡V 240 V / 50 VA Max |
| Weight |
2.3 kg |
|