Contact

LI-575

Completely free from harmonic influences Wide band frequencies between 0.5Hz and 200kHz can be continuously set. Dynamic reserve 100dB Phase measurements easily performed. Built-in noise measuring mode; equivalent of 0.1Hz to 100Hz

Sensitivity	100nV to 500mV
Frequency range	0.5Hz to 200kHz
Input mode	Ground line may be switch-floated.
Input impedence	100M ohm//40pF
Input referred noise	Less than 5nV/√Hz (at 1kHz)
Reference mode	AUTO, INT, EXT, EXT2F
Phase adjustment	Not required
Time constant	1.25ms to 125s, 6dB/oct or 12dB/oct
Dynamic reserve	Maximum 60dB
DC output	Acosφ, Asinφ, A, φ, NOISE
Power requirements	AC100V, 120V, 220V or 240V switchable
Dimensions(mm)	480(W) X 149(H) X 500(D)
Weight	approx.20kg